Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Weatherstriped Window

DOOR GLASS

REMOVAL

1. Position an assistant on one side of the door to receive the glass and weatherstrip seal.
2. Start at an inside, upper corner. Separate the seal from the window opening. Push the glass and seal outward from the window opening. Remove the glass and seal.
3. Clean the window opening.

INSTALLATION

1. Install the weatherstrip seal on the window glass. Verify that the glass is seated in the groove around the edge of the seal.
2. Insert an installation cord in the weatherstrip seal inner groove.

NOTE: Use mineral spirits as a lubricant to aid seal installation in the window opening.

3. Position the glass and seal in the window opening.
4. Pull the installation cord outward and force the seal lip over the panel flange around the edge of the opening.
5. Seat the seal inner lip on the panel flange. Press against the lip around the edge of the seal.

NOTE: Remove any mineral spirits with a clean cloth after glass installation.

Fig. 12:




6. Verify that the seal is seated in the window opening (Fig. 12).
7. Test the window for water leaks.