Operation CHARM: Car repair manuals for everyone.

Disc Brake System: Tools and Equipment

BASIC SERVICE
- Jack or lifting device.
- Safety stands.
- Lug nut wrench.
- 12 inch slip joint pliers.

Compressing The Pad Ears:




- Wire cutter (for removing cotter pins).
- Large C-clamp (for compressing the caliper piston).

Compressing The Caliper Piston:




- Hammer and brass drift.
- Complete set of combination wrenches or sockets.
- Elastic cord or wire (for supporting calliper once it is removed).

Suspending The Caliper:




- Wire brush.
- Bleeding device;
- Pressure bleeder or
- Vacuum bleeder or
- One-man brake bleeder kit or
- Length of clear plastic hose (3/16 inch ID) and a glass jar.

Brake Bleeding Setup:




- Suction bulb (for removing brake fluid from reservoir).
- Drip pan.
- Clean shop towels.
- Torque wrench (0-120 lb. ft.)
- Disc brake micrometer (for measuring rotor thickness).



- Dial indicator (for measuring lateral runout).





IF CALIPER REBUILDING IS NECESSARY:

Removing The Piston:




- Source of compressed air and air nozzle (for removing piston).

Installing The Caliper Boot:




- Caliper dust boot driver tool.
- Emery cloth (for cleaning inside of caliper).