III. Cavity Code Inspection Proc. & Reinstallation of Headlamp Switch

FIGURE 2 - LOCATION OF CAVITY CODE ON INSTRUMENT PANEL:

1. After removing the headlight switch from the Instrument Panel I.P.), refer to Figure 2 to locate and identify the cavity code.

2. The alphabetical cavity code will appear in the same area on any switch regardless of the model usage or part number.

3. If the cavity code is a "D" or "M", replace the switch using the correct part number per the Parts Information section.

If the switch does not have the suspect alphabetical cavity codes, reconnect the existing switch. Proceed to step 4.

4. Reassemble the headlight switch and I.P. trimplate per the applicable Service Information Manual instructions.

5. Install the Campaign Identification Label.

CAMPAIGN IDENTIFICATION LABEL:

CAMPAIGN IDENTIFICATION LABEL

Each vehicle modified in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label." Each label provides a space to include the five digit dealer code of the dealer performing the campaign service. This information may be inserted with a typewriter or ballpoint pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for periodic servicing by the owner.

Apply "Campaign Identification Label" only on a clean dry surface.