Electric Door Lock Switch - Separation
86chevy14CORPORATE NUMBER: 631011R NUMBER: 86-T-123
GROUP: 8A-Cab Electrical
IMPORTANT - All Service Personnel Should Read DATE: October, 1986
SUBJECT: ELECTRIC DOOR LOCK SWITCH SEPARATION
MODELS: 1985-86 C, K, G-1, 2, 3 TRUCKS WITH ELECTRIC DOOR LOCKS
Some electric door lock switches may become separated while installed in the vehicle. This condition may be reported on either the right or left or both doors. A clip has been released to correct this condition.
The subject trucks use switch P/N 20043224. To update existing switches, use clip P/N 16602550. Future production of this switch will include installation of the clips by the supplier.
To install clips:
1. Remove switch assembly as described in section 8A of the Service Manual.
Figure No. 1 - Switch Reassembly:
2. If switch has become separated, inspect for damage, if no damage is found reassemble switch and add two clips as indicated in Figure No. 1.
3. If switch is separated and damaged, replace complete switch assembly and add clips as indicated in Figure No. 1.
Use applicable Labor Operation Number and Time.