Operation CHARM: Car repair manuals for everyone.
Home >> GMC Truck >> 1986 >> K 2500 Truck 4WD V8-454 7.4L >> Repair and Diagnosis >> Transmission and Drivetrain >> Drive Axles, Bearings and Joints >> Axle Shaft Assembly >> Service and Repair >> GMC Single Speed Axle >> Axle Shaft

Axle Shaft

REAR AXLE SHAFT

Removing axle shaft. GMC single speed axle:






1. Remove hub cap retaining cap screws and hub cap.
2. Install a slide hammer adapter into tapped hole in axle flange.
3. Attach slide hammer onto adapter and remove axle shaft from housing, Fig. 9.
4. Reverse procedure to install. Lubricate small end of axle shaft and install into housing using a new gasket. Torque axle flange cap screws on 15 ft. lbs.
pro multis · About Operation CHARM