Fuel Filter: Service and Repair

Fuel Filter:

WARNING: To reduce the risk of fire and personal injury when the fuel line is disconnected, cover the fuel line with a shop cloth to collect the fuel, and then place the cloth in an approved container.

REMOVAL:
1. Raise vehicle.
2. Disconnect the fuel lines from the filter.

NOTE: Use a back-up wrench to prevent filter, O-ring, or fuel line damage.

3. Remove the filter from the car.

INSTALLATION:
1. Install the new filter in position loosely.
2. Using new O-rings, install the fuel lines into the filter.

NOTE: Use a back-up wrench to prevent filter, O-ring, or fuel line damage.

3. Torque line fittings to 26 Nm (20 lb-ft).
4. Secure the filter to the vehicle.
5. Lower the vehicle.
6. START the engine and inspect for leaks.

NOTE: Refer to FUEL PUMP/FUEL GAUGE SENDING UNIT for fuel strainer removal.