Side Door Window - Improper Seating

90chevy15
GMC NUMBER: 90-10-82

GROUP: 10 Body Section

DATE: July, 1990

CORPORATE
NUMBER: 061004
SUBJECT: IMPROPER SEATING OF SIDE DOOR WINDOW

MODELS: 1988-90 C/K 1,2,3 TRUCKS
Some 1988-90 C/K Trucks may experience a condition where the window will not seat properly in the window channel when raising the window at highway speed (ABOVE 45 MPH). This condition can create a poor window seal and customer may comment regarding increased wind noise. To correct this condition, a new window channel clip with a revised ramp angle has been released.

REPAIR PROCEDURE

1. Roll down window.
2. Pull back window weatherstrip to expose channel clip rivets.
3. Drill out rivets and remove channel clip.
4. Position new channel clip where old one was and rivet using rivet part number 15562787 or comparable.

5. Reposition weatherstrip.
SERVICE PARTS INFORMATION


Quantity
P/N Description Required
15667246 Channel Clip Side Window 1 per door
15562787 Rivet 1 per door
(1/8" x 1/4" or longer)

Parts are currently available through GMSPO.

WARRANTY INFORMATION

For vehicles repaired under warranty use:

Labor Operation: T8115

Labor Time: .3 hrs.

NOTE Labor Operation is coded to base vehicle coverage in the warranty system.