Footnotes 301 Thru 350

[301] Spark knock. USE 16143452 (SCAN I.D. = 3491) FOR HOT HARD RESTART (REQUIRES FUEL PUMP P/N 25115925, FUEL SENDER P/N 25092778). USE 16143463 (SCAN I.D. = 3451) FOR CODE 42, SPARK KNOCK, HIGH IDLE.



[302] Hard start hot (requires installation of a rubber bumper pkg PN 25004553, and a pulsator pkg PN 25094266) or CODE 42, high idle, spark knock (G055).



[303] USE 16143457 (SCAN I.D. = 3521) FOR HOT HARD RESTART (REQUIRES FUEL PUMP P/N 25115925, FUEL SENDER P/N 25092778). USE 16143466 (SCAN I.D. = 3481) FOR CODE 42, SPARK KNOCK, HIGH IDLE.



[304] Hard hot restart (requires rubber bumper pkg PN 25004553, and a pulsator package PN 25094266), or CODE 42, intermittent high idle, spark knock (G055).



[305] USE 16143452 (SCAN I.D. = 3491) FOR HOT HARD RESTART (REQUIRES FUEL PUMP P/N 25115925, FUEL SENDER P/N 25092778). USE 16143463 (SCAN I.D. = 3451) FOR CODE 42, SPARK KNOCK, HIGH IDLE.



[306] Tip-in hesitation,stall,CODES 23,25,33,or 34, or speed flare on declutch op. w/man. trans. (CODE 23 or 25 require MAT sensor model year diagnostics) (G027). WITH THIS PROM INSTALLED, USE 1987-88 2.8L SPEED DENSITY ENGINE DRIVEABILITY AND EMISSIONS MANUAL.



[307] CODES 23, 25, 33, 34, driveability and stalling (G027). PROM UPDATE ELIMINATES MAF SENSOR, REPLACING IT WITH A SPEED DENSITY SYSTEM. WITH A 1990 OR EARLIER PRIMARY CARTRIDGE, I.D. VEHICLE ON SCANNER AS A 1989 MODEL (VIN = K-1-W).



[308] Tip-in hesitation,stall,CODES 23,25,33,or 34, or speed flare on declutch op. w/man. trans. (CODE 23 or 25 require MAT sensor model year diagnostics). PROM UPDATE ELIMINATES MAF SENSOR, REPLACING IT WITH A SPEED DENSITY SYSTEM. WITH A 1990 OR EARLIER PRIMARY CARTRIDGE, I.D. VEHICLE ON SCANNER AS A 1989 MODEL (VIN = K-1-W).



[309] Code 23, 25, 33, 34, driveability and stalling. PROM UPDATE ELIMINATES MAF SENSOR, REPLACING IT WITH A SPEED DENSITY SYSTEM. WITH A 1990 OR EARLIER PRIMARY CARTRIDGE, I.D. VEHICLE ON SCANNER AS A 1989 MODEL (VIN = K-1-W).



[310] Tip-in hesitation,stall,CODES 23,25,33,or 34, or speed flare on declutch op. w/man. trans. (CODE 23 or 25 require MAT sensor model year diagnostics) (G027). PROM UPDATE ELIMINATES MAF SENSOR, REPLACING IT WITH A SPEED DENSITY SYSTEM. WITH A 1990 OR EARLIER PRIMARY CARTRIDGE, I.D. VEHICLE ON SCANNER AS A 1989 MODEL (VIN = K-1-W).



[311] High emissions, exhaust odor, starting and driveability problems (G046). Requires Connector Bleed Assembly P/N 10105820



[312] FALSE CODES 43, 54, unstable idle. FOR 2.73 (GU2) AXLE USE 16120077 (SCAN I.D. = 9891). FOR 3.08 (GU4) AXLE USE 16120082 (SCAN I.D. = 9901). FOR 3.42 (GU6) AND 3.73 (GT4) AXLES USE 16120086 (SCAN I.D. = 9911).



[313] Running change. FOR FALSE CODE 44 ON LONG COAST DOWN, USE RETROFIT SERVICE PROM 01228486 SCAN I.D. 8486, AAND 1050. FOR REGULAR SERVICE REPLACEMENT, USE PROM 16062797 SCAN I.D. 2223, AAND 2798.



[314] Running change. FOR FALSE CODE 44 ON LONG COAST DOWN, USE RETROFIT SERVICE PROM 01228487 SCAN I.D. 8487, AANF 1052. FOR REGULAR SERVICE REPLACEMENT, USE PROM 16062801 SCAN I.D. 2233, AANF 2802.



[315] Surge on acceleration and/or at road load speeds, false "Service Engine Soon" light (CODE 32), poor driveability during warm up, Detonation under load (G052).



[316] Spark knock. USE 16143570 (SCAN I.D. = 3531) FOR HOT HARD RESTART (REQUIRES FUEL PUMP P/N 25115764, FUEL SENDER P/N 25093526). USE 16143459 (SCAN I.D. = 3571) FOR CODE 42, SPARK KNOCK, HIGH IDLE.



[317] Spark knock. USE 16143455 (SCAN I.D. = 3511) FOR HOT HARD RESTART (REQUIRES FUEL PUMP P/N 25115764, FUEL SENDER P/N 25093526). USE 16143453 (SCAN I.D. = 3501) FOR CODE 42, SPARK KNOCK, HIGH IDLE.



[318] Spark knock (G043). USE 16143580 (SCAN I.D. = 3551) FOR HOT HARD RESTART (REQUIRES FUEL PUMP P/N 25115764). USE 16143462 (SCAN I.D. = 3591) FOR CODE 42, SPARK KNOCK, HIGH IDLE.



[319] Spark knock (G055). USE 16143545 (SCAN I.D. = 3461) FOR HOT HARD RESTART (REQUIRES FUEL PUMP P/N 25115764, FUEL SENDER P/N 25093744). USE 16143465 (SCAN I.D. = 3471) FOR CODE 42, SPARK KNOCK, HIGH IDLE.



[320] CODE 42, spark knock, intermittent high idle. IF MAJOR CONDITION IS HARD HOT ENGINE RESTART, PROM ALSO REQUIRES INSTALLATION OF A RUBBER BUMPER PKG PN 25004553, AND PULSATOR PKG PN 25094266.



[321] USE 16143545 (SCAN I.D. = 3461) FOR HOT HARD RESTART (REQUIRES FUEL PUMP P/N 25115764, FUEL SENDER P/N 25093744). USE 16143465 (SCAN I.D. = 3471) FOR CODE 42, SPARK KNOCK, HIGH IDLE.



[322] USE 16143570 (SCAN I.D. = 3531) FOR HOT HARD RESTART (REQUIRES FUEL PUMP P/N 25115764, FUEL SENDER P/N 25093526). USE 16143459 (SCAN I.D. = 3571) FOR CODE 42, SPARK KNOCK, HIGH IDLE.



[323] USE 16143455 (SCAN I.D. = 3511) FOR HOT HARD RESTART (REQUIRES FUEL PUMP P/N 25115764, FUEL SENDER P/N 25093526). USE 16143453 (SCAN I.D. = 3501) FOR CODE 42, SPARK KNOCK, HIGH IDLE.



[324] Spark knock. USE 16143457 (SCAN I.D. = 3521) FOR HOT HARD RESTART (REQUIRES FUEL PUMP P/N 25115925, FUEL SENDER P/N 25092778). USE 16143466 (SCAN I.D. = 3481) FOR CODE 42, SPARK KNOCK, HIGH IDLE.



[325] Spark knock. USE 16143452 (SCAN I.D. = 3491) FOR HOT HARD RESTART (REQUIRES FUEL PUMP P/N 25115925, FUEL SENDER P/N 25092778). USE 16143463 (SCAN I.D. = 3451) FOR CODE 42, SPARK KNOCK, HIGH IDLE.



[326] Tip-in hesitation, stall, CODES 23, 25, 33, or 34, or speed flare on declutch op. w/man. trans. (CODE 23 or 25 require MAT sensor model year diagnostics) (G027). WITH THIS PROM INSTALLED, USE 1987-88 2.8L SPEED DENSITY ENGINE DRIVEABILITY AND EMISSIONS MANUAL.



[327] CODES 23, 25, 33, 34. PROM UPDATE ELIMINATES MAF SENSOR, REPLACING IT WITH A SPEED DENSITY SYSTEM. WITH A 1990 OR EARLIER PRIMARY CARTRIDGE, I.D. VEHICLE ON SCANNER AS A 1989 MODEL (VIN = K-1-W).



[328] Tip-in hesitation,stall,CODES 23,25,33,or 34, or speed flare on declutch op. w/ man. trans. (CODE 23 or 25 require MAT sensor model year diagnostics). PROM UPDATE ELIMINATES MAF SENSOR, REPLACING IT WITH A SPEED DENSITY SYSTEM. WITH A 1990 OR EARLIER PRIMARY CARTRIDGE, I.D. VEHICLE ON SCANNER AS A 1989 MODEL (VIN = K-1-W).



[329] Tip-in hesitation,stall,CODES 23,25,33,or 34, or speed flare on declutch op. w/ man. trans. (CODE 23 or 25 require MAT sensor model year diagnostics) (G027). PROM UPDATE ELIMINATES MAF SENSOR, REPLACING IT WITH A SPEED DENSITY SYSTEM. WITH A 1990 OR EARLIER PRIMARY CARTRIDGE, I.D. VEHICLE ON SCANNER AS A 1989 MODEL (VIN = K-1-W).



[330] CODES 23, 25, 33, 34, driveability and stalling (G027). PROM UPDATE ELIMINATES MAF SENSOR, REPLACING IT WITH A SPEED DENSITY SYSTEM. WITH A 1990 OR EARLIER PRIMARY CARTRIDGE, I.D. VEHICLE ON SCANNER AS A 1989 MODEL (VIN = K-1-W).



[331] Code 23, 25, 33, 34, driveability and stalling. PROM UPDATE ELIMINATES MAF SENSOR, REPLACING IT WITH A SPEED DENSITY SYSTEM. WITH A 1990 OR EARLIER PRIMARY CARTRIDGE, I.D. VEHICLE ON SCANNER AS A 1989 MODEL (VIN = K-1-W).



[332] FOR USE WITH MODEL C1 TRUCKS - USE 16121162 (SCAN I.D. = 3511). FOR USE WITH MODEL C2, K, K2, AND K1000 TRUCKS - USE 16121166 (SCAN I.D. = 3521).



[333] Surge on acceleration and/or at road load speeds, false "Service Engine Soon" light (CODE 32), poor driveability during warm up, Detonation under load (G052).



[334] Cold engine extended crank. USE 16181863 (SCAN I.D. = 0844) FOR COLD START STALL. USE 16181859 (SCAN I.D. = 0834) ONLY IF REQUIRED TO SOLVE BOTH COLD START STALL AND CHUGGLE.



[335] [Cold engine extended crank. USE 16181871 (SCAN I.D. = 0864) FOR COLD START STALL. USE 16181867 (SCAN I.D. = 0854) ONLY IF REQUIRED TO SOLVE BOTH COLD START STALL AND CHUGGLE.



[336] Engine does not stay running on initial cold start and chuggle at 35-45 MPH with TCC engaged. New MEM-CAL may affect fuel economy. DO NOT RELY ON THE SCANNER ID TO DETERMINE WHICH PROM IS IN A VEHICLE. LOOK AT THE BCC ON THE PROM TO BE SURE. DO NOT CONFUSE WITH SOME 1991 MODELS WITH A 2.84 AXLE RATIO AND A FEDERAL EMISSIONS PACKAGE WITH SCANNER ID 5644 BUT A BCC OF A]



[337] Cold engine extended crank. USE 16165848 (SCAN I.D. = 5614) FOR COLD START STALL. USE 16165843 (SCAN I.D. = 5624) ONLY IF REQUIRED TO SOLVE BOTH COLD START STALL AND CHUGGLE.



[338] Cold engine extended crank. USE 16165839 (SCAN I.D. = 5634) FOR COLD START STALL. USE 16165829 (SCAN I.D. = 5644) ONLY IF REQUIRED TO SOLVE BOTH COLD START STALL AND CHUGGLE.



[339] Cold engine extended crank. USE 16165839 (SCAN I.D. = 5634) FOR COLD START STALL. USE 16165829 (SCAN I.D. = 5644) ONLY IF REQUIRED TO SOLVE BOTH COLD START STALL AND CHUGGLE.



[340] Cold engine extended crank. USE 16165848 (SCAN I.D. = 5614) FOR COLD START STALL. USE 16165843 (SCAN I.D. = 5624) ONLY IF REQUIRED TO SOLVE BOTH COLD START STALL AND CHUGGLE.



[341] Hesitation or sag during the first two minutes of cold operation while vehicle is under moderate to heavy throttle driveaway, or TCC chuggle.



[342] Cold start-stall, hesitation, or sag when the engine coolant is between 36°F - 111°F (2°C - 44°C); or Inadequate A/C performance when driving at steady speed and throttle position, between 24 - 64 MPH, when the cruise control is not being used.



[343] Engine does not stay running on initial cold start and chuggle at 35-45 MPH with TCC engaged. New MEM-CAL may affect fuel economy. DO NOT RELY ON THE SCANNER ID TO DETERMINE WHICH PROM IS IN A VEHICLE. LOOK AT THE BCC ON THE PROM TO BE SURE. DO NOT CONFUSE WITH SOME 1991 MODELS WITH A 2.84 AXLE RATIO AND A FEDERAL EMISSIONS PACKAGE WITH SCANNER ID 5644 BUT A BCC OF A



[344] Cold engine extended crank. USE 16165848 (SCAN I.D. = 5614) FOR COLD START STALL. USE 16165843 (SCAN I.D. = 5624) ONLY IF REQUIRED TO SOLVE BOTH COLD START STALL AND CHUGGLE.



[345] Cold engine extended crank. USE 16165839 (SCAN I.D. = 5634) FOR COLD START STALL. USE 16165829 (SCAN I.D. = 5644) ONLY IF REQUIRED TO SOLVE BOTH COLD START STALL AND CHUGGLE.



[346] Cold engine extended crank. USE 16181883 (SCAN I.D. = 0894) FOR COLD START STALL. USE 16181875 (SCAN I.D. = 0874) ONLY IF REQUIRED TO SOLVE BOTH COLD START STALL AND CHUGGLE.



[347] Cold engine extended crank. USE 16181887 (SCAN I.D. = 0904) FOR COLD START STALL. USE 16181879 (SCAN I.D. = 0884) ONLY IF REQUIRED TO SOLVE BOTH COLD START STALL AND CHUGGLE.



[348] Service Engine Soon light (SES) with a code 43 or tip-in sag, tip-in hesitation, surge at WOT, or spark detonation when cold.



[349] Engine stall. MANUAL TRANSMISSION CARS SHOULD ALSO BE UPDATED WITH THE CLUTCH ANTICIPATE SWITCH PER DEALER SERVICE BULLETIN NO. 91-472-7C.



[350] Engine does not stay running on initial cold start and chuggle at 35-45 MPH with TCC engaged. New MEM-CAL may affect fuel economy. DO NOT RELY ON THE SCANNER ID TO DETERMINE WHICH PROM IS IN A VEHICLE. LOOK AT THE BCC ON THE PROM TO BE SURE. DO NOT CONFUSE WITH SOME 1991 MODELS WITH A 2.84 AXLE RATIO AND A FEDERAL EMISSIONS PACKAGE WITH SCANNER ID 5644 BUT A BCC OF A.