4WAL 4 Sensor

Fig. 5 Four Wheel Anti-Lock Brake System.:

This braking system, Fig. 3, is designed to reduce the occurrence of wheel lock-up during severe braking conditions. To accomplish this function, the system regulates hydraulic brake line pressure by using an Electro-Hydraulic Control Unit (EHCU) module or a Brake Pressure Modulator Valve (BPMV). The EHCU/BPMV module has two types of valves: isolation valves, which maintain separate pressure for each front wheel and combine pressure for the rear wheels, and dump valves, which "dump" pressure to each front wheel separately and rear wheels combined. These valves are controlled by a microcomputer which is part of the EHCU/BPMV module. During a severe braking condition, the EHCU/BPMV is designed to permit the valves to do one of three functions or a combination of all three. The EHCU will allow the valves to either maintain the same hydraulic pressure, release hydraulic pressure or increase pressure.

The EHCU/BPMV module controls this system based on the signals received from the wheel speed sensors and the brake pedal switch. The speed sensors are connected directly to the EHCU/BPMV. If the EHCU/BPMV module detects wheel slip, the module will adjust the hydraulic pressure to compensate for the wheel slip condition.

The 4WAL system is connected directly to the "Anti-Lock" warning lamp on the instrument panel. An indication of the proper 4WAL operation and a bulb check is performed each time the ignition switch is turned to the On position. The warning lamp will remain lit for two seconds during this bulb check. A 4WAL system malfunction will be indicated by the "Anti-Lock" warning lamp remaining on.