Instrument Cluster / Carrier: Service and Repair

Instrument Cluster Replacement

s��@:

°��@��@��@:

Removal

1. Negative battery cable.
2. Cup holder.

^ Remove screw under holder and slide out I/P.

3. Instrument cluster bezel.

^ The bezel is retained by four clips across the top edge and three along the bottom.

4. Electrical connections for headlamp switch, dimmer control and accessory switches.
5. Four screws retaining instrument cluster.
6. Instrument cluster from vehicle.

^ Keep fingers and other foreign objects away from the flexible circuit connections.

Install

1. Press instrument cluster into instrument panel.
2. Instrument cluster hold-down screws.

^ Electrical connections for headlamp, dimmer control and accessory switches.

3. Instrument cluster bezel.
4. Negative battery cable.