Front Assembly
Auxiliary Heater Hose Assembly Routing Front:
Remove or Disconnect
Tool Required:
J 38723 Heater Line Quick Connect Separator or Equivalent
Raise the vehicle and support with suitable safety stands.
1. Engine coolant.
2. Right front wheelhouse.
. Bolts.
4. Front hose assembly from auxiliary heater pipe.
- Push front hose assembly into auxiliary heater pipe and insert J 38723 or equivalent into hose to release locking tabs.
5. Front hose assembly from rear hose assembly.
- Push auxiliary hose assembly into rear hose assembly and insert J 38723 or equivalent into hose to release locking tabs.
Auxiliary Heater Hose Assembly Routing Rear:
Install or Connect
1. Front hose assembly to auxiliary heater pipe.
- Push hose assembly into auxiliary heater pipe until retainer tabs lock.
2. Front hose assembly to rear hose assembly.
- Push hose assembly into rear hose assembly until retainer tabs lock.
3. Bolts. Tighten bolts to 17 Nm (13 lbs. ft.).
4. Right front wheelhouse.
5. Engine coolant.
- Lower the vehicle.
- Check the system for leaks.