General

COMPOSITE HEADLAMP ADJUSTMENT









Horizontal and vertical aiming of each headlamp assembly is done by two adjusting screws. The screws are located within the radiator support, and are not easily seen. Two holes in the radiator support for each headlamp assembly provide access to the recessed adjusting screws .Turn the screws using a T15 torx head bit.

Adjust the headlamps to the specifications required by state and/or local authorities.

There are three methods for aiming the headlamps:

1. Visual Headlamp Aiming Procedure (Preferred)
2. Headlamp Aiming by the Screen Method
3. Headlamp Aiming Alternative Procedure