Headlamp Aiming Alternative Procedure

HEADLAMP AIMING ALTERNATIVE PROCEDURE

- Tool Required: J 25300-A Headlamp Aimer

Prepare the vehicle. Turn OFF head lamps.
1. Make sure all components are in place, if other work has been done on the vehicle.
2. Make sure the vehicle is on a level surface.
3. Stop all other work on the vehicle.
4. Make sure the vehicle has one-half tank of fuel or less.
5. Close the doors.
6. Rock the vehicle sideways.

- Using Headlamp Aimer J 25300-A, adjust the headlamps to the specifications required by state and/or local authorities. Instructions for tool use accompany the tool. This kit contains special adapters for use with composite lenses.