Part 2

Solenoid to Valve Body 8 Nm (71 lb in)
Control Valve Assembly to Case 11 Nm (97 lb in)
Oil Test Hole Plug 11 Nm (97 lb in)
Flywheel Housing Cover to Transmission 7 Nm (62 lb in)
Pump Body to Cover 24 Nm (18 lb ft)
Pump Assembly to Case 24 Nm (18 lb ft)
Rear Servo Cover to Case 24 Nm (18 lb ft)
Pressure Control Solenoid Bracket to Valve Body 8 Nm (71 lb in)
Parking Pawl Bracket to Case 24 Nm (18 lb ft)
Accumulator Housing to Valve Body 11 Nm (97 lb in)
Fourth Clutch 23 Nm (17 lb ft)
Oil Pan to Case 24 Nm (18 lb ft)
Extension Housing to Case 34 Nm (25 lb ft)
Manual Shaft to Detent Lever Nut 24 Nm (18 lb ft)
Speed Sensor and Bracket Assembly to Case 11 Nm (97 lb in)
Case Center Support 44 Nm (32 lb ft)
Flywheel to Converter 44 Nm (32 lb ft)
Transmission Case to Engine 44 Nm (33 lb ft)
Cooler Pipe Connector Nut at Case and Radiator 38 Nm (28 lb ft)
Valve Body to Case/Lube Pipe 11 Nm (97 lb in)
Engine Rear Mount to Transmission Bolt 44 Nm (32 lb ft)
Engine Rear Support Bracket to Frame Nut 44 Nm (32 lb ft)
Valve Body to Case/PSM 11 Nm (97 lb in)
Drain Plug, Oil Pan 34 Nm (25 lb ft)