Instrument Panel Cluster (IPC) - Bezel Replacement

BEZEL REPLACEMENT - INSTRUMENT PANEL (I/P) CLUSTER

REMOVAL PROCEDURE
1. Apply the parking brake to prevent the vehicle from moving.
2. If equipped with an automatic transmission, move the shift lever all the way down to last gear.
3. Tilt the steering wheel to the full down position.




4. Pull gently rearward on the corners of the bezel from the instrument panel (IP) assembly.
5. Remove the bezel.

INSTALLATION PROCEDURE




1. Position the bezel to the IP assembly.
2. Attach the bezel to the IP assembly by pushing gently on the bezel till it is in place.
3. Ensure all clips are in place.
4. Tilt the steering wheel to the normal drive position.
5. If equipped with an automatic transmission, move the shift lever to the park position.
6. Disengage the parking brake.