30000 MI or 48000 KM

Lubricate
    Steering and Suspension
      Lubricate the suspension, steering linkage, transaxle shift linkage and the underbody contact points and linkage.
    Locks
      Lubricate body components. Lubricate all key lock cylinders, hood latch assembly, secondary latch, pivots, spring anchor, release pawl, rear compartment hinges, outer liftgate handle pivot points, rear door detent link, roller mechanism, liftgate handle pivot points, latch bolt, fuel door hinge, cargo door hinge, locks and folding seat hardware. More frequent lubrication may be required when exposed to a corrosive environment. Applying silicone grease on weather-strips with a clean cloth will make them last longer, seal better and not stick or squeak.
Inspect
    Wiper Blade
      Visually inspect wiper blades for wear or cracking. Replace blade inserts that appear worn or damaged or that streak or miss areas of the windshield.
    Washer Fluid
      Check windshield washer fluid level, and add fluid as needed.
    Vehicle
      Visually check for any leaks or damage. A fluid loss in any vehicle system could indicate a problem. Have the system inspected and repaired and the fluid level checked. Add fluid if needed.
    Suspension
      Inspect steering and suspension components. Visually inspect front and rear suspension and steering system for damaged, loose or missing parts or signs of wear. Inspect power steering lines and hoses for proper hook-up, binding, leaks, cracks, chafing, etc. Visually check constant velocity joints, rubber boots and axle seals for leaks.
    Restraints and Safety Systems
      Inspect restraint system components. Make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired. Have any torn or frayed safety belts replaced. Also look for any opened or broken air bag coverings, and have them repaired or replaced. (The air bag system does not need regular maintenance.)
    Radiator Cooling Fan
      Inspect thermostatically controlled cooling fan (if equipped). If your engine has thermostatically controlled cooling fan, inspect hoses and ducts for proper hook-up (or every 12 months, whichever occurs first). Be sure the valve works properly.
    Intake Air Duct
      Check the air intake system installation to assure that gaskets are properly sealed and that all hose connections, fasteners and other components are tight. Also check to be sure that the air cleaner housing is properly seated and the cover fits tightly. Tighten connections and fasteners or replace damaged parts as necessary. This is a Noise Emission Control Service. Applicable only to vehicles sold in the United States.
    Heat Shield, Exhaust
      Inspect shields and underhood insulation for damage or looseness. Adjust or replace as required. This is a Noise Emission Control Service. Applicable only to vehicles sold in the United States.
    Fuel Supply Line
      Inspect fuel system for damage or leaks.
    Fluid - A/T
      Check transmission fluid level and add as needed.
    Exhaust System
      Inspect exhaust system for loose or damaged components.
    Cooling System
      Visually inspect hoses and have them replaced if they are cracked, swollen or deteriorated. Inspect all pipes, fittings and clamps. To help ensure proper operation, a pressure test of the cooling system and pressure cap and cleaning the outside of the radiator and air conditioning condenser is recommended at least once a year.
    Coolant
      Check engine coolant fluid level and add fluid as needed.
    Brakes and Traction Control
      Inspect brake system. Visually inspect brake lines and hoses for proper hook-up, binding, leaks, cracks, chafing, etc. Inspect disc brake pads for wear and rotors for surface condition. Inspect other brake parts, including calipers, parking brake, etc.
    Air Filter Element
      Inspect engine air filter change indicator. If necessary, replace filter.
Replace
    Oil Filter, Engine
    Fuel Filter
    Engine Oil
      Change engine oil and filter, or every 12 months, whichever occurs first. Reset indicator.
    Clutch Fluid
      6 - Speed Manual Transmission Only.
Rotate
    Tires
      Rotate tires and check inflation pressures and wear.