58. Main Housing Disassemble

Main Housing Disassemble

Tools Required
^ J43780 Main Housing Dowel Pin Installer

Main Housing Fill Plug Disassemble





1. Remove fill tube plug (1).
2. Remove fill tube seal (2).
3. Install fill tube seal (2) into the main housing.
4. Align the tab on fill plug (1) with the tang on the main housing.

Important: The fill plug retaining tab snaps into place over a tang on the main housing.

5. Install fill plug (1) into fill tube seal (2).
6. Press the fill plug down until the retaining tab locks into place.