Horn: Service and Repair

HORN REPLACEMENT

REMOVAL PROCEDURE
1. Raise and support the hood.
2. Disconnect the electrical connectors from the horn assembly.




3. Remove the nut (2) that retains the horn mounting bracket (1) to the vehicle.
4. Remove the horn assembly from the vehicle.
5. Note the location of the trumpet mouth relative to the mounting bracket.
6. Remove the nut holding the horn to the mounting bracket.
7. Remove the horn from the mounting bracket.

INSTALLATION PROCEDURE




1. Install the horn to the mounting bracket.
2. Line up the trumpet mouth in the same direction as the original.
3. Install the nut holding the horn to the mounting bracket.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the nut to 10 N.m (90 lb in).

4. Install the horn assembly to the vehicle.
5. Install the nut (2) in order to retain the horn mounting bracket (1) to the vehicle.

Tighten the nut to 25 N.m (18 lb ft).

6. Connect the electrical connectors to the horn assembly.
7. Close the hood.