114000 MI or 182400 KM
LubricateSteering and Suspension
Lubricate the chassis components. Lubricate the suspension, steering linkage, Lubricate the chassis transaxle shift linkage and the underbody contact points and linkage.
Locks
Lubricate body components. Lubricate all key lock cylinders, hood latch assembly, secondary latch, pivots, spring anchor, release pawl, rear compartment hinges, outer liftgate handle pivot points, rear door detent link, roller mechanism, liftgate handle pivot points, latch bolt, fuel door hinge, cargo door hinge, locks and folding seat hardware. More frequent lubrication may be required when exposed to a corrosive environment. Applying silicone grease on weather-strips with a clean cloth will make them last longer, seal better and not stick or squeak.
Inspect
Wiper Blade
Inspect wiper blades. Visually inspect wiper blades for wear or cracking. Replace blade inserts that appear worn or damaged or that streak or miss areas of the windshield.
Washer Fluid
Check windshield washer fluid level, and add fluid as needed.
Vehicle
Visually check for any leaks or damage. A fluid loss in any vehicle system could indicate a problem. Have the system inspected and repaired and the fluid level checked. Add fluid if needed.
Throttle Cable/Linkage
nspect the throttle system for interference or binding and for damaged or missing parts. Replace parts as needed. Replace any components that have high effort or excessive wear. Do NOT lubricate the accelerator or the cruise control cables.
Suspension
Inspect steering and suspension components. Visually inspect front and rear suspension and steering system for damaged, loose or missing parts or signs of wear. Inspect power steering lines and hoses for proper hook-up, binding, leaks, cracks, chafing, etc. Visually check constant velocity joints, rubber boots and axle seals for leaks.
Restraints and Safety Systems
Inspect restraint system components. Make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired. Have any torn or frayed safety belts replaced. Also look for any opened or broken air bag coverings, and have them repaired or replaced. (The air bag system does not need regular maintenance.)
Heat Shield, Exhaust
Vehicles with GVWR above 10,00 lbs. Only
Fluid - A/T
Cooling System
Inspect engine cooling system. Visually inspect hoses and have them replaced if they are cracked, swollen or deteriorated. Inspect all pipes, fittings and clamps. To help ensure proper operation, a pressure test of the cooling system and pressure cap and cleaning the outside of the radiator and air conditioning condenser is recommended at least once a year.
Coolant
Check engine coolant fluid level, and add fluid as needed.
Brakes and Traction Control
Inspect brake system. Visually inspect brake lines and hoses for proper hook-up, binding, leaks, cracks, chafing, etc. Inspect disc brake pads for wear and rotors for surface condition. Inspect other brake parts, including calipers, parking brake, etc.
Air Filter Element
Inspect engine air filter or change indicator. If necessary, replace filter.
Replace
Oil Filter, Engine
Engine Oil
Change engine oil and filter, or every 12 months, whichever occurs first. Reset indicator.
Rotate
Tires
Rotate tires and check inflation pressures and wear.