Wiring Repairs

Wiring Repairs

Danger: In order to reduce the risk of personal injury, loss of high voltage isolation to ground and higher system impedance, do not attempt to repair any HV wiring, connector, or terminal that is damaged. High voltage coaxial type cables are not repairable. Never attempt to repair a coaxial type cable. The entire cable/harness or component must be replaced. In order to maintain system integrity and personal safety, never attempt to repair any high voltage wiring, cables, or terminals. Performing this procedure on high voltage circuits may result in serious injury or death.


The Wiring Repairs section contains the following types of wiring repair information. Using these elements together will make wiring repair faster and easier:

* Testing for Intermittent Conditions and Poor Connections (Testing for Intermittent Conditions and Poor Connections)
* Flat Wire Repairs (Flat Wire Repairs)
* GMLAN Wiring Repairs (GMLAN Wiring Repairs)
* High Temperature Wiring Repairs (High Temperature Wiring Repairs)
* Heated Oxygen Sensor Wiring Repairs (Heated Oxygen Sensor Wiring Repairs)
* Splicing Copper Wire Using Splice Sleeves (Splicing Copper Wire Using Splice Sleeves)
* Splicing Twisted or Shielded Cable (Splicing Twisted or Shielded Cable)
* Splicing Inline Harness Diodes (Splicing Inline Harness Diodes)
* SIR/SRS Wiring Repairs (SIR/SRS Wiring Repairs)