Operation CHARM: Car repair manuals for everyone.
Home >> Geo >> 1990 >> Prizm L4-1600cc 1.6L DOHC VIN 5 >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Cable >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Cable: Service and Repair

REMOVAL
1. Disconnect the negative (-) cable.
2. Remove the spark plug wires from the spark plugs by gripping boot firmly. Turn the boot one half turn when removing the wire.

CAUTION: Do NOT attempt to remove the spark plug wire by pulling on it. Pull and twist the wire boot only.

3. Remove the distributor cap by removing the 3 screws.

NOTE: If possible, leave any spark plug wire guides attached to the wires. This will aid in proper re-installation of the wires.


INSTALLATION

1. Install the distributor cap and tighten the 3 screws.
2. Install the spark plug wires to the spark plugs by pressing the boots firmly onto the plugs.
3. Connect the negative (-) battery cable.
pro multis · About Operation CHARM