Shift Lock Module, Solenoid & Switch

Removal
1. Disconnect battery ground cable.
2. Remove five retaining screws from rear center console and rear center console.
3. Remove two retaining screws from shift selector cover and shift selector cover.
4. Disconnect shift lock control module electrical connectors.
5. Remove shift lock control module retaining screw and shift lock control module.
6. Disconnect shift lock solenoid and shift lock switch electrical connectors.
7. Remove two shift lock solenoid retaining screws and shift lock solenoid.
8. Remove two shift lock control switch retaining screws and shift lock control switch.

Installation
1. Install shift lock control switch and two retaining screws.
2. Install shift lock solenoid and two retaining screws.
3. Connect shift lock solenoid and shift lock switch electrical connectors.
4. Install shift lock control module and retaining screw.
5. Connect shift lock control electrical connectors.
6. Install shift selector cover and two retaining screws.
7. Install rear center console and five retaining screws.
8. Connect battery ground cable.