Hub & Bearing
FRONT HUB/BEARINGFig. 2 Disassembled View Of Hub & Bearing Assembly.:
1. Remove knuckle from vehicle and mount into a suitable vise.
2. Using a suitable screwdriver, remove dust deflector.
3. Using seal remover tool No. J-26941, or equivalent, remove inner grease seal from knuckle, Fig. 2 .
4. Remove inner bearing snap ring and disc brake dust shield. 5. Push out hub using hub remover tool Nos. J-25287 and J-35378, or equivalents.
6. Using tools mentioned in step 5, remove outer bearing race from hub.
7. Using seal remover tool No. J-26941, or equivalent, remove outer grease seal.
8. Using bearing remover tool Nos. J-35399 and J-35379, or equivalents, remove bearing assembly.
9. Reverse procedure to install. Use bearing installation tool Nos. J-8092 and J-35411 to install hub bearing assembly. Use seal installation tool No. J-35737 to install outer grease seal. Install hub using tool Nos. J-8092 and J-35399. Use tool No. J-35737 to install inner grease seal. Use ring installation tool No. J-35379 to install dust deflector ring. Ensure dust deflector ring faces down (open end down).