EGR Solenoid Vacuum Valve Replacement

REMOVE OR DISCONNECT
1. Negative (-) battery cable.
2. Exhaust Gas Recirculation Solenoid Vacuum valve electrical connector.
3. Two vacuum hoses from EGR Solenoid Vacuum valve.
4. Two screws and EGR Solenoid Vacuum valve from bracket.

INSTALL OR CONNECT
1. EGR Solenoid Vacuum valve to bracket; secure with two screws.
2. Two vacuum hoses to Solenoid Vacuum valve.
3. EGR Solenoid Vacuum valve electrical connector.
4. Negative (-) battery cable. Tighten negative (-) battery cable-to-negative (-) battery terminal retainer to 15 Nm (11 lb ft).