Ignition Cable: Service and Repair

Secondary Wire Replacement:

SECONDARY WIRING REPLACEMENT

REMOVE OR DISCONNECT
1. Negative (-) battery cable.
2. Secondary (spark plug) wire(s) from wire retainers.
3. Secondary (spark plug) wire(s) from the spark plugs.
4. Secondary spark plug wire(s) from distributor cap.

IMPORTANT: Note wire placement to cap and routing to engine so as to maintain correct firing order and proper clearances to engine parts that could cause damage to wiring.

INSTALL OR CONNECT
1. Secondary spark plug wire(s) to distributor cap.
2. Secondary (spark plug) wire(s) to spark plugs.
3. Reposition secondary (spark plug) wires and insert into secondary wire retainers.
4. Negative (-) battery cable. Tighten Negative (-) battery cable-to-negative (-) battery terminal. Tighten negative (-) battery cable-to-negative (-) battery terminal retainer to 5.5 Nm (48.68 in lb).