Fuel Tank Pressure Sensor: Service and Repair
REMOVE AND DISCONNECT1. Negative (-) battery cable.
2. Remove the fuel tank from vehicle.
3. [1][2]Fuel tank pressure sensor electrical connector.
4. Two bolts and [1][2]Fuel Tank Pressure sensor from fuel tank.
INSTALL OR CONNECT
1. [1][2]Fuel tank pressure sensor to fuel tank; secure with two bolts.
NOTE: Install [1][2]fuel tank pressure sensor on the fuel tank with the sensor terminals facing the fuel level sensor (gauge) side.
Tighten
^ Fuel tank pressure bolts to 1.2-2.0 Nm (1.0 lb ft).
2. [1][2]Fuel tank pressure sensor electrical connector.
3. Negative (-) battery cable. Tighten negative (-) battery cable-to-negative (-) battery terminal retainer to 15 Nm (11 lb ft).