Getting Started

From 98 MY, Honda dealer service departments are recommended to use Tech 2. Please refer to Tech 2 scan tool user guide.





- Before operating the Honda PCMCIA card with the Tech 2, the following steps must be performed:

1. The Honda 98 System PCMCIA card (1) inserts into the Tech 2 (5).
2. Connect the SAE 16/19 adapter (3) to the DLC cable (4).
3. Connect the DLC cable to the Tech 2 (5).
4. Mark sure the vehicle ignition is off.





5. Connect the Tech 2 SAE 16/19 adapter to the vehicle DLC.
6. The vehicle ignition turns on.





7. Verify the Tech 2 power up display.

NOTE: The RS232 Loop back connector is only to use for diagnosis of Tech 2 and refer to user guide of the Tech 2.