Power Flow

Power Flow

Gear operation
Gears on the mainshaft:
^ 4th gear is engaged/disengaged with the mainshaft by the 4th clutch.
^ 5th gear is engaged/disengaged with the mainshaft by the 5th clutch.
^ Reverse gear is engaged/disengaged with the mainshaft by the 5th clutch.
^ 3rd gear is splined with the mainshaft and rotates with the mainshaft.

Gears on the countershaft:
^ Final gear is integral with the countershaft.
^ 1st gear, 4th gear, 2nd gear and park gear are splined with the countershaft, and rotate with the countershaft.
^ 5th gear and reverse gear rotate freely from the countershaft. The reverse selector engages 5th gear and reverse gear with the reverse selector hub. The reverse selector hub is splined to the countershaft so 5th gear and reverse gear engage with the countershaft.
^ Countershaft 3rd gear is engaged/disengaged with the countershaft by the 3rd clutch.

Gears on the secondary shaft:
^ 1st gear is engaged/disengaged with the secondary shaft by the 1st clutch. 1st gear is engaged with the secondary shaft by the one-way clutch and the 1st-hold clutch when decelerating using for engine braking.
^ 2nd gear is engaged/disengaged with the secondary shaft by the 2nd clutch.
^ The idler gear is splined with the secondary shaft and rotates with the secondary shaft.

P Position
Hydraulic pressure is not applied to the clutches. Power is not transmitted to the countershaft. The countershaft is locked by the park pawl interlocking the park gear.

N Position





Engine power transmitted from the torque converter drives the mainshaft 3rd gear, the countershaft 3rd gear, and the secondary shaft idler gear, but hydraulic pressure is not applied to the clutches. Power is not transmitted to the countershaft. The countershaft 5th gear is engaged with the reverse selector hub and the countershaft by the reverse selector, when the shift lever is shifted in the N position from the forward range (D, D3, 2, 1 positions). The countershaft reverse gear is engaged when shifted from the R position.

1 Position





In 1 position, hydraulic pressure is applied to the 1st clutch and the 1st-hold clutch.
The power flow when accelerating is as follows:
^ Hydraulic pressure is applied to the 1st clutch, then the 1st clutch engages the secondary shaft 1st gear with the secondary shaft by the one-way clutch.
^ Hydraulic pressure is also applied to the 1st-hold clutch, and the 1st-hold clutch engages the secondary shaft 1st gear with the secondary shaft.
^ The mainshaft 3rd gear drives the secondary shaft via the countershaft 3rd gear and the secondary shaft idler gear.
^ The secondary shaft 1st gear drives the countershaft 1st gear and the countershaft.
^ Power is transmitted to the final drive gear, which in turn drives the final driven gear.

1 Position





The power flow when decelerating is as follows:
^ Hydraulic pressure is applied to the 1st clutch and the 1st-hold clutch. Rolling resistance from the road surface goes through the front wheels to the final drive gear, then to the secondary shaft idler gear.
^ The one-way clutch disengages because the application of torque is reversed.
^ The counterforce conveyed to the secondary shaft idler gear turns the mainshaft 3rd gear via the countershaft 3rd gear. As a result, engine braking can be obtained with 1st gear.
In D or D3 position, the optimum gear is automatically selected from the 1st, 2nd, 3rd, 4th, and 5th gears according to conditions such as the balance between the throttle opening (engine loading) and vehicle speed.

D or D3 Position in 1st gear





^ Hydraulic pressure is applied to the 1st clutch, then the 1st clutch engages the secondary shaft 1st gear with the secondary shaft by the one-way clutch.
^ The mainshaft 3rd gear drives the secondary shaft via the countershaft 3rd gear and secondary shaft idler gear.
^ The secondary shaft 1st gear drives the countershaft 1st gear and the countershaft.
^ Power is transmitted to the final drive gear, which in turn drives the final driven gear.

D or D3 Position in 2nd gear and 2 Position





^ Hydraulic pressure is applied to the 2nd clutch, then the 2nd clutch engages the secondary shaft 2nd gear with the secondary shaft.
^ The mainshaft 3rd gear drives the secondary shaft via the countershaft 3rd gear and secondary shaft idler gear.
^ The secondary shaft 2nd gear drives the countershaft 2nd gear and the countershaft.
^ Power is transmitted to the final drive gear, which in turn drives the final driven gear.
^ Hydraulic pressure is also applied to the 1st clutch, but since the rotation speed of 2nd gear exceeds that of 1st gear, power from 1st gear cut off at the one-way clutch.

D or D3 Position in 3rd gear





^ Hydraulic pressure is applied to the 3rd clutch, then the 3rd clutch engages the countershaft 3rd gear with the countershaft.
^ The mainshaft 3rd gear drives the countershaft 3rd gear and the countershaft.
^ Power is transmitted to the final drive gear, which in turn drives the final driven gear.
^ Hydraulic pressure is also applied to the 1st clutch, but since the rotation speed of 3rd gear exceeds that of 1st gear, power from 1st gear cut off at the one-way clutch.

D Position in 4th gear





^ Hydraulic pressure is applied to the 4th clutch, then the 4th clutch engage the mainshaft 4th gear with the mainshaft.
^ The mainshaft 4th gear drives the countershaft 4th gear and the countershaft.
^ Power is transmitted to the final drive gear, which in turn drives the final driven gear.
^ Hydraulic pressure is also applied to the 1st clutch, but since the rotation speed of 4th gear exceeds that of 1st gear, power from 1st gear cut off at the one-way clutch.

D Position in 5th gear





^ Hydraulic pressure is applied to the servo valve to engage the reverse selector with the countershaft 5th gear while the shift lever is in the forward range (D, D3, 2 and 1 position).
^ Hydraulic pressure is also applied to the 5th clutch, then the 5th clutch engages the mainshaft 5th gear with the mainshaft.
^ The mainshaft 5th gear drives the countershaft 5th gear, which drives the reverse selector hub and the countershaft.
^ Power is transmitted to the final drive gear, which in turn drives the final driven gear.
^ Hydraulic pressure is also applied to the 1st clutch, but since the rotation speed of 5th gear exceeds that of 1st gear, power from 1st gear cut off at the one-way clutch.

R Position





^ Hydraulic pressure is applied to the servo valve to engage the reverse selector with the countershaft (reverse gear while the shift lever is in the R position).
^ Hydraulic pressure is also applied to the 5th clutch, then the 5th clutch engages the mainshaft reverse gear with the mainshaft.
^ The mainshaft reverse gear drives the countershaft reverse gear via the reverse idler gear.
^ The rotation direction of the countershaft reverse gear is changed via the reverse idler gear.
^ The countershaft reverse gear drives the countershaft via the reverse selector, which drives the reverse selector hub.
^ Power is transmitted to the final drive gear, which in turn drives the final driven gear.