Navigation Frequently Asks For Anti-theft Code And/or needs GPS Initialization (With Navigation)
Navigation System Symptom Troubleshooting - Navigation frequently asks for anti-theft code and/or needs GPS initialization
Navigation frequently asks for anti-theft code and/or needs GPS initialization
NOTE:
- This often caused by a loss of battery power, a low or poor battery condition, or a poor ground.
- Make sure that the correct DVD color and version are installed.
- Before troubleshooting, make sure you have the anti-theft code.
- After troubleshooting, enter the anti-theft code.
- Check any official Honda service website for more service information about the navigation system.
1. Measure the voltage between audio-navigation unit connector A (24P) terminal No. 24 and body ground, and between audio-navigation unit connector C (8P) terminal No. 1 and body ground.
Is there battery voltage on both terminals?
YES -
Go to step 2.
NO -
Repair an open in the wire between the under-hood fuse/relay box and the audio-navigation unit.�
2. Measure the voltage between audio-navigation unit connector A (24P) terminal No. 12 and body ground, and between audio-navigation unit connector C (8P) terminal No. 4 and body ground.
Is there less than 0.2 V on both terminals?
YES -
Replace the audio-navigation unit.�
NO -
Repair an open or high resistance in the wire between the audio-navigation unit and body ground (G503).�