Delayed Engagement After Shifting From N To R, Or Excessive Shock When Shifted Into R
Delayed engagement after shifting from N to R, or excessive shock when shifted into R
Worn or damaged engine or transmission mounts
Shift solenoid valve E defective
A/T clutch pressure control solenoid valve A defective
Shift cable broken or out of adjustment
Connection between the shift cable and transmission or body is worn
Input shaft (mainshaft) speed sensor defective
Output shaft (countershaft) speed sensor defective
ATF temperature sensor defective
Shift fork shaft stuck
Foreign material in separator plate orifice
Shift valve E defective
4th/reverse accumulator defective
Lock-up shift valve defective
4th clutch defective
Notes
Check the engine and transmission mounts.
Notes
Inspect shift solenoid valve E for seizure, and the O-rings for wear and damage.
Notes
Inspect the A/T clutch pressure control solenoid valve filter/gasket and the O-rings for wear and damage, and inspect the solenoid valves for seizure.
Notes
Check the input shaft (mainshaft) speed sensor and the output shaft (countershaft) speed sensor installation.
Notes
Check for a loose shift cable at the shift lever and the selector control lever.
Notes
Inspect the clutch piston, the clutch piston check valve, and the O-rings. Check the spring retainer for wear and damage. Inspect the clearance between the clutch end-plate and the top disc. If the clearance is out of tolerance, inspect the clutch discs and the plates for wear and damage. If the discs are worn or damaged, replace them as a set. Inspect the clutch wave-plate height. If the height is out of tolerance, replace the wave-plate. If the discs and the plates are OK, adjust the clearance with the clutch end-plate.
Notes
Check for a missing shift fork bolt on the shift fork shaft.
Notes
Check for a clogged orifice in the separator plate. If the orifice is clogged, remove it and clean the separator plate orifice.
Notes
Check the 4th clutch pressure A/T Pressure Test.
Notes
Inspect the servo valve and the O-ring for wear and damage.
Notes
Check shift valve E in the main valve body for free movement, and check the shift valve E spring for wear and damage.
Notes
Check the lock-up shift valve in the regulator valve body for free movement, and check the lock-up shift valve spring for wear and damage.