Torque Specifications
Manifolds:
Manifold Removal:
Manifold Assembly:
Manifold Installation Tightening Sequence:
Cylinder Head/Valve Train - Part 1:
Cylinder Head/Valve Train - Part 2:
Cylinder Head/Valve Train - Part 3:
Timing Belt Replacement:
Cylinder Head Bolt Removal:
Cylinder Head Installation:
Tighten cylinder head bolts, in sequence, in two steps:
1st step: Tighten to 30 N.m (3.0 kgf-m, 22 lb.ft)
2nd step: Tighten to 60 N.m (6.0 kgf-m, 43 lb.ft)
Engine Block - Part 1:
Engine Block - Part 2:
Engine Lubrication:
Cam/Rocker Arm Installation:
Camshaft Pulley Installation:
M/T Flywheel Replacement:
A/T Drive Plate Torque:
