Brakes - Front Rotor Refinishing Equipment
87honda02Model Applicable To File Under Bulletin No.
ALL ALL SPECIAL 87-034
TOOLS Issue Date
DEC 18, '87
Front Brake Disc Refinishing Equipment (Supersedes 86-021, Dated October 3, 1986)
The front brake disc refinishing equipment listed below is required to service Honda automobiles (see Section 3.9 of your Automobile Dealer Sales and Service Agreement).
This equipment replaces Honda Brake Disc Grinders (T/N 07783-0070000 and 07783-0070001), which have been discontinued. Repair of the Honda Brake Disc Grinder may not be possible because some of the parts are not available. We recommend the purchase of new equipment, which may be purchased through American Honda's Service and Tool Equipment Program or from the companies listed below.
NOTE: Equipment costs vary from vendor to vendor.
Company Tool Name Part Number
American Honda Motor Co., Inc. Kwik-Lathe 108-0005-04
100 W. Alondra Blvd. Power Feed* 108-0120-05
Gardena, CA 90248-2702
Attn: Special Tools (Service Tool and Equipment Program) (800) 346-6327
Note: Contact Special Tools for an order form.
Kwik-Way Manufacturing Co. Kwik-Lathe 108-0005-04
500 57th Street Power Feed* 108-0120-05
Marion, IA 52302 (800) 553-5953 (800) 332-5499 from Iowa
Snap-on Tools Corporation Front Brake
2801 80th Street Disc Lathe YA 180
Kenosha, WI 5314-1410 Power Feed* YA 189
(414) 656-5200
*Power feed is required to obtain an optimum finish.
RETURN INFORMATION
To return new equipment purchased from American Honda or Kwik-Way Manufacturing Co., be sure to follow Kwik-Way's "Returned Goods Procedure" on the reverse side.
To return new equipment purchased from Snap-on Tools Corporation, contact your local Snap-on dealer.
KWIK-WAY RETURNED GOODS PROCEDURE
No returned goods will be accepted at Kwik-Way Manufacturing Co. without prior written approval.
CONDITIONS
1. Only defective equipment and/or parts not repairable in the field still under warranty may be returned.
2. Only stock adjustments for new, unused parts will be allowed.
3. Equipment cannot be returned for stock adjustment.
PROCEDURE
1. Telephone Allen Taylor, Kwik-Way Manufacturing Co., at 319-377-9421.
2. Return equipment or parts freight prepaid with returned goods authorization documents to:
Kwik-Way Manufacturing Co. 755-26th Street Marion, IA 52302
NOTE: Include the returned goods authorization number (RGA#) on the mailing label.
3. Include a copy of the original sales invoice with your shipment to allow for timely credit.