Instrument Cluster / Carrier: Service and Repair

1. Disconnect battery ground cable.
2. Remove lefthand side lower trim panel from instrument panel.
3. Push instrument panel lamp dimmer control switch and rear window defogger switch out of instrument panel, then disconnect electrical connectors.

Fig. 3 Instrument Cluster Bezel Removal:

4. Remove caps and four attaching screws, then remove instrument cluster bezel, Fig. 3.

Fig. 4 Instrument Cluster Removal:

5. Remove four screws attaching instrument cluster to instrument panel, Fig. 4.
6. Pull instrument cluster outward and disconnect electrical connectors and speedometer cable, then remove cluster.
7. Reverse procedure to install.