Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Ignition Switch: Service and Repair
Electrical Switch Replacement
SRS wire harness is routed near the ignition switch.
CAUTION:
^ All SRS electrical wiring harnesses are covered with yellow outer insulation.
^ Before disconnecting the SRS wire harness, install the short connector on the airbag.
^ Replace the entire affected SRS harness assembly if it has an open circuit or damaged wiring.
1. Remove the steering wheel, then remove the steering column covers.
2. Disconnect the 7-P connector from the under-dash fuse box.
3. Insert the key and turn it to "0."
4. Remove the 2 screws and replace the base of the switch.