Disc Brake Models

1. Raise and support vehicle, then remove rear wheels.
2. Apply parking brake, then remove hub cap.
3. Raise locking tab on spindle nut, then remove nut.
4. Remove 6 mm brake disc retaining screw, then the caliper shield.
5. Remove brake hose mounting bolts, then the caliper bracket mounting bolts.
6. Remove caliper and hang from undercarriage with short piece of wire. Do not hang caliper by brake hose.
7. Screw two 12 mm bolts into disc to push disc off of hub. Remove disc.
8. Remove hub unit from knuckle.
9. Reverse procedure to install.