Ignition Switch: Service and Repair

1. On models equipped with radio coded theft protection system, refer to Vehicle Damage Warnings for system disarming and arming procedures. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
2. Disconnect battery ground cable, then remove dashboard lower cover and knee bolster.
3. Remove steering column covers, then disconnect 7-P connector from under dash fuse/relay box.
4. Insert key and turn ignition switch to Off position.
5. Remove screws from steering lock cylinder, then remove ignition switch.
6. Reverse procedure to install.
7. On models equipped with radio coded theft protection system, refer to Vehicle Damage Warnings for system disarming and arming procedures. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.