Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 1995 >> Prelude L4-2.2L DOHC (VTEC) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Engine Control Module >> Testing and Inspection >> Diagnostic Procedures
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Diagnostic Procedures








If the inspection for a particular code requires the Test Harness, remove the right door sill molding and the small cover on the right kick panel and pull the carpet back to expose the ECM. Unbolt the ECM cover. Turn the Ignition Switch off and connect the Test Harness.

Check the system according to the procedures described for the appropriate code(s).





CAUTION:
- Puncturing the insulation on a wire can cause poor or intermittent electrical connections.
- For testing at connectors other than the Test Harness, bring the Tester Probe into contact with the terminal from the connector side of Wire Harness Connectors in the Engine Compartment. For female connectors, just touch lightly with the Tester Probe and do not insert the probe.
pro multis · About Operation CHARM