System Specifications

TIGHTENING SPECIFICATIONS
Throttle Control Drum: 8 Nm (72 inch lbs.)
Parking Brake Stop: 14 Nm (10 ft. lbs.)
Vehicle Speed Sensor: 22 Nm (16 ft. lbs.)
Drain Plug: 50 Nm (36 ft. lbs.)
Needle Bearing Stop: 12 Nm (108 inch lbs.)
Reverse Idler Gear Shaft/Holder Bolt: 12 Nm (108 inch lbs.)
Reverse Shift Fork: 14 Nm (10 ft. lbs.)
Mount Bracket: 50 Nm (36 ft. lbs.)





Tighten housing bolts in sequence in two or more steps to 45 Nm (33 ft. lbs.)




Drive Plate Torque