Front Suspension

CAUTION:
- Replace the self-locking nuts after removal.
- The vehicle should be on the ground before any bolts or nuts connected to rubber mounts or bushings are tightened.





NOTE:
- Wipe off any dirt, oil from grease on the threads before tightening the fasteners.
- The right and left forks are not interchangeable. The left damper fork is marked with "AL" while the right damper fork is marked with "AR".
- The right and led upper arms are not interchangeable. The left upper arm is marked with "S01-L" while the right arm is marked with "S01-R".
- Before tightening the upper and lower mounting nuts on the stabilizer link, adjust the location of the link with the suspension under vehicle load.
- When installing the radius arm washers, the "FR" mark faces the front of the vehicle.
- After installing the suspension arm, check the front wheel alignment, and adjust if necessary.