General Precautions

SUPPLEMENTAL RESTRAINT SYSTEM (SRS) (If HVAC/Electrical maintenance is required)

The Accord Sedan/Coupe (V6) SRS includes a driver's airbag located in the steering wheel hub, a passenger's airbag located in the dashboard above the glove box, and side airbags ('00 model) located in the front seat-backs.

Servicing, disassembling or replacing these items will require special precautions and tools, and should therefore be done by and authorized Honda dealer.

- To avoid rendering the SRS inoperative, which could lead to personal injury or death in the event of a severe frontal collision, all SRS service work must be performed by an authorized Honda dealer.
- Improper service procedures, including incorrect removal and installation of the SRS, could lead to personal injury caused by unintentional deployment of the frontal airbags (and/or side airbags on some '00 models).
- Do not bump the SRS unit, Otherwise, the system may fail in case of a collision, or airbags may deploy when the ignition switch is ON (II).
- SRS electrical wiring harnesses are indicated with yellow color coding. Related components are located in the steering column, front console, dashboard, dashboard lower panel, in the dashboard above the glove box, in the front seats ('00 model) and around the floor ('00 model). Do not use electrical test equipment on these circuits.