Timing Belt: Adjustments

NOTE:
- Always adjust the timing belt tension with the engine cold.
- Always rotate the crankshaft counterclockwise when viewed from the pulley side. Rotating it clockwise may result in improper adjustment of the belt tension.

1. Remove the cylinder head cover.





2. Set the No. 1 piston at TDC.
3. Rotate the crankshaft five or six revolutions to set the belt.
4. Set the No. 1 piston at TDC.





5. Loosen the adjusting bolt 1/2 turn (180�) only.
6. Rotate the crankshaft counterclockwise three teeth on the camshaft pulley.
7. Tighten the adjusting bolt to 54 Nm (40 ft. lbs.).
8. After adjusting, Retorque the crankshaft pulley bolt to 177 Nm (130 ft. lbs.).
9. Install the cylinder head cover.