Airbag Handling and Storage

Do not disassemble the airbags. it has no serviceable parts. Once an airbag has been deployed, it cannot be repaired or reused.

For temporary storage of the airbag during service, please observe the following precautions.


WARNING: If the airbag is improperly stored face down, accidental deployment could propel the unit with enough force to cause serious injury.






Store the removed airbag with the pad surface up. Never put any things on the removed airbag.






Keep free from any oil, grease, detergent, or water to prevent damage to the airbag.






Store the removed airbag on a secure, flat surface away from any high heat source (exceeding 200° F / 93° C).

Never perform electrical inspections to the airbags, such as measuring resistance






Do not position yourself in front of the airbag assembly during removal, inspection, or replacement.

CAUTION: Improper handling or storage can internally damage the airbag assembly, making it inoperative. If you suspect the airbag assembly has been damaged, install a new unit, and refer to the Deployment/Disposal Procedures (see "Damaged Airbag Special Procedure") for disposing of the damaged airbag.