Continuously Variable Trans

Start Clutch Calibration Procedure

NOTE: When the following parts are replaced, the TCM must memorize the feedback signal for the start clutch control.
- TCM
- Transmission assembly
- Start clutch assembly
- Lower valve body assembly
- Engine assembly or overhaul

97 - OO Models
The TCM ('97-98 models) and PCM ('99-00 models) memorize the feedback signal when you drive the vehicle as follows:
- After warming up the engine (the radiator fan comes on).
- Shift into [D] position.
- Turn OFF all electrical systems.
- Drive the vehicle up to the speed 37 mph (60 km/h).
- After the speed reaches 37 mph (60 km/h), release the accelerator for 5 seconds.