Non VTEC Engine

Rocker Arms and Shafts Disassembly/Reassembly - F23A5 Engine





NOTE:
^ Identify parts as they are removed to ensure reinstallation in their original locations.
^ Inspect rocker shafts and rocker arms.
^ The rocker arms must be installed in the same positions if reused.
^ When removing or installing the rocker arm assembly, do not remove the camshaft holder bolts. The bolts will keep the holders, springs and rocker arms on the shaft.
^ Prior to reassembling, clean all the parts in solvent, dry them, and apply lubricant to any contact points.