Tail Lamp: Service and Repair

Taillight Replacement

Taillight

1. Open the trunk lid and pull back the trunk side trim.




2. Disconnect the connectors from the taillight.
3. Remove the three mounting nuts, then pull out the taillight.
4. Install the taillight, and note these items:
- Inspect the gasket; replace it if it is distorted or stays compressed.
- After installing the taillights, run water over them to make sure they do not leak.

BRAKE/TAILLIGHT BULB: 21/5 W
TURN SIGNAL LIGHT BULB: 21 W

Inner Taillights

1. Open the trunk lid.




2. Disconnect the connectors (A) from the inner taillight.
3. Remove the three mounting nuts (B) and a clip (C), then pull out the inner taillight.

TAILLIGHT BULB: 5 W
BACK-Up LIGHT BULB: 21 W