Alternator Belt

Alternator Belt Inspection and Adjustment

Special Tools Required
Belt tension gauge 07JGG-001010A

Belt Tension Gauge Method

Inspection

Alternator Belt (Tension Gauge Method):

1. Attach the belt tension gauge to the belt and measure the tension. Follow the gauge manufacturer's instructions. If the bell is worn or damaged, replace it. If the belt needs adjustment, go to step 2.

Adjustment

2. Loosen the mounting boll (A) and locknut (B).
3. Turn the adjusting bolt (C) to obtain the proper belt tension, then retighten the locknut and mounting bolt.
4. Recheck the belt tension.
5. If you installed a new belt, run the engine for 5 minutes, then readjust the belt to the used belt specification.
6. Check the power steering pump belt adjustment.

Deflection Method

Inspection

Alternator Belt (Deflection Method):

1. Apply a force of 98 N (10 kgf, 22 lbf), and measure the deflection at the mid point (A) between the alternator and crankshaft pulley. If the belt is worn or damaged, replace it. If the belt needs adjustment, go to step 2.

Adjustment

2. Loosen the mounting bolt (B) and locknut (C).
3. Turn the adjusting bolt (D) to obtain the proper belt tension, then retighten the locknut and mounting bolt.
4. Recheck the belt tension.
5. If you installed a new belt, run the engine for 5 minutes, then readjust the belt to the used belt specification.
6. Check the power steering pump belt adjustment.