Power Mirror Replacement

Power Mirror Replacement

1. Lower the door glass fully.




2. Carefully pry out the mirror mount cover (A) by hand as shown.
3. Remove the door panel.




4. Disconnect the connector (A), and detach the harness clip (B), then remove the bolts securing the mirror. While holding the mirror (C), push out the clip (D), and remove the mirror. Take care not to scratch the door.
5. Install the power mirror in the reverse order of removal, and note these items:
- Make sure the connector is plugged in properly.
- Attach the harness clip.
- Push the cover clip into place securely.