Front Blower Unit

SRS components are located in this area. Review the SRS component locations, precautions, and procedures in the SRS section before performing repairs or service.

1. Make sure you have the anti-theft code for the radio then write down the frequencies for the radio's preset buttons.
2. Disconnect the negative cable from the battery.
3. Remove the evaporator.
4. Remove the front passenger's airbag.




5. Disconnect the connectors (A) from the blower motor, the blower resister and the recirculation control motor, then remove the wire harness clip (B). Remove the mounting nuts, the mounting be and the blower unit (C).
6. Install the unit in the reverse order of removal, and note these items:
- Make sure that there is no air leakage.
- Enter the anti-theft code for the radio, then enter the customer's radio station presents.