Component Tests and General Diagnostics

Power Relay Test

Use this chart to identify the type of relay, then do the test listed for it.

NOTE: The turn signal/hazard relay input test.

Normally-open type A:

Check for continuity between the terminals.
- There should be continuity between the No.1 and No.2 terminals when power and ground are connected to the No.3 and No.4 terminals.
- There should be no continuity between the No.1 and No.2 terminals when power is disconnected.

Normally-open type B:

Blower Motor Relay, Type 1:

Blower Motor Relay, Type 2:

ABS Pump Motor Relay:

Rear A/C Blower High Relay:

Rear Window Defogger Relay:

Check for continuity between the terminals.
- There should be continuity between the No.1 and No.3 terminals when power and ground are connected to the No.2 and No.4 terminals.
- There should be no continuity between the No.1 and No.3 terminals when power is disconnected.

Five-terminal type A:

Rear A/C Blower Main Relay:

Check for continuity between the terminals.
- There should be continuity between the No.1 and No.2 terminals when power and ground are connected to the No.3 and No.5 terminals.
- There should be continuity between the No.2 and No.4 terminals when power is disconnected.

Five-terminal type B: