Fluid Pressure Sensor/Switch: Service and Repair

2nd Clutch Pressure Switch Replacement





1. Disconnect the connector from the 2nd clutch pressure switch 20 Nm (2.0 kgf-m. 14 ft. lbs.)
2. Replace the 2nd clutch pressure switch, then install a new one with a new sealing washer. Tighten the switch on the metal part, not the plastic part.
3. Reconnect the connector, making sure there is no water, oil, dust, or other foreign particles inside it.

3rd Clutch Pressure Switch Replacement





1. Disconnect the connector from the 3rd clutch pressure switch.
2. Replace the 3rd clutch pressure switch, then install a new one with a new sealing washer. Tighten the switch on the metal part, not the plastic part.
3. Reconnect the connector, making sure there is no water, oil, dust, or other foreign particles inside it.